Silicone Products

Product Details:

We have gained a remarkable position in the concerned industry by offering a wide range of High Vacuum Silicone Grease. Our offered High vacuum silicone grease is processed under the guidance of highly skilled professionals using quality tested chemical compounds and the modern technology. Furthermore, this vacuum silicone grease is tested by our quality examiners in order to ensure its quality. The offered vacuum silicone grease can be availed from us at budget friendly price.

Features:

• Long shelf life
• Easy to use
• Highly effective

Benefits:

• High temperature stability
• Low coefficient of friction
• Long life lubricant
• Resist water-steam acid & alkali
• Reduces frequency of lubrication

Product Details:

• It contains penetration oil. Used as multipurpose maintenance aid, which acts as a cleaner, penetrate, lubricant, rust preventive and deimoisiuritsing agent and industrial maintenances.

Product Details:

Silicone oil fluid is a waterclear sililcone fluid available in viscosities ranging from 0.65 centistokes to 100,000 centistokes, important features of fluid include.

Littile change in physical properties over a wide temperatures span...a relatively flat viscosity temperature slope and serviceabillity from 40 to over 400⁰ f (-40 to 204⁰c).

Excellent water repellency.

Good dielectric properties over a wide range of temperature and frequencies.

Low surface tension -readily wets clean surface to impart water repellency and release characteristics.

Low-toxicity-tests have established that this fluid is essentially non-toxic and non--irritating (although temporary discomfort may result if rubbed into the eye)

SILICONE OIL fluid also exhibits oxidation resistance, very low vapour pressures, and high flash point. it is insoluble in organic liquids other than active solvents and is non-greasy, non-rancidifying and vertually odouraless.

In jet dyeing machine or for similar processes Silicone Defoamer is recommended in the concentration range of 0.1 to 0.2 gms/litre.

USES
Its unique combination of outstanding prpoerties suit SILICONE OIL fluid for a variety of application functions, as well as for a wide range of products and processes.

AS A RELEASE MATERIAL
Used along or as part of a compounded formula, SILICONE OIL fluid provides an odourises non- toxic, non-carbonizing mould release for rubber, plastics and metal die castings.

AS A FOAM PREVENTIVE
Extremely small amounts of the fluid effectively control foam in my procession.. operations, especially in non-aqueoussystems.

AS A MECHANICAL OIL
Excellent viscosity-temperature characteristics, therms and chemical stability shear breakdown resistance, compressibility, and rubber compatibility make SILICONE OIL fluid outstanding for machanical/hydraulic uses. Typical uses include hydraulic stabilizers, damping medium.

Product Details:

SHM L 170 is a versatile silicone release agent. Having the consistency of petroleum jelly. It is used in the rubber, plastics, plywood and metal fabricating industries. It gives a long lasting, easy release and does not break down to from a carbonaceous build-up. Itkeeps moulds and patterns cleaner, reduces maintenance, minimizes scrap, and inproves the appearance of moulded parts.

SHM L 170 is inert to metals, plastics and most organic materials. As supplied, LVG COMPOUNDcanbe wiped on moulds or platens or dispersed in certain solvents and appliedby spraying, swabbing, or perchloroethylene, and ethyl ketone.

SHM L 170 is insoluble in wate, or ethyl alchol, glycerol, or menaral oil.

TYPICAL PHYSICAL PROPERTIES
These values are not intended for use in preparing specifications.

Colour... Light grey, translucent, Consistency...Petroleum jelly, specific gravity at 25c (77F).. 1.0 Flash point minimum... 600 F Bleed, percentage, 24 hrs. at 400 F..10, volatillity, percent, 24hrs. at 400F, less than..5

APPLICATIONS
IN THE RUBBER INDUSTRY
SHM L 170 is used as a mouldrelease agent for difficult release jobs, it is anexcellent lubricant and preservativefor rubber. Wiped with this grease-like silicone, tight-fitting rubber parts slide into place quickly and easily.

IN THE PLASTIC INDUSTRY
SHM L 170 used as a release agent for epoxy, polystyrene, polyvinylchloride, polyester resins and other plastic materials.

method of application vary. In some case, SHM L 170 is simply rubber on the mouldsurface. In applications involving complex mould, LVG COMPOUND is dispersedinvants and sprayed on the mould surface. Method of application, concentrations, and frequency of application are best determined by actual trials. Where such dispersion is desire, a 5% concentration of LVG in solvent is suggested.

PACKING
50gms, 1kg, 4kgs & 20kgs.

Product Details:

SILKOT F-60P IS

• Flammable gas under pressure.
• Perfect direct sunlight.
• for not expose to temperatures exceeding 50⁰c.
• Keep out of reach of children.
• For camping gas stove.
• For portablegas cheater.
• This cartridge complieswith En 417.
• Follow the instructions supplied by the qualified factory.
• Store in a cool dry place, discard it in a safe place.
• Changing the the Cartridge: Perform this operation in a well ventilated area, free from ignition sources
• Close the cartridge valve after use.
• Remove the cartridge from appliance after use.
• Replace the connection seal if it is damaged or lost.

Product Details:

• It Contains penetration oil. Used as Multipurpose maintenance aid, which acts as a cleaner, penetrate, lubricant, rust preventive and deimoisiuritsing agent and industrial maintenances.

Product Details:

Item Code: SHM MR 30/ SHM MR 35

SHM MR 30 is a Mould Release agent for Rubber and Plastic Industries. In Rubber Industries like Tyres, Tubes, Fan Belts , Hoses, Gaskets and many other rubber parts, SHM MR 30 acts as an efficient and economical release, and shining Agent.

Properties:

• SHM MR 30/35 do not gum, or form carbonaceous deposits that build up on process equipment to cause expensive product rejection.
• Release is complete, clean and surface finishes are blemish free and sharp in details.
• Complicated and deep cavity moulds are unloaded more easily with fewer rejects.
• It improves safety and working conditions and acts an antistick material and eliminates need for talc mica and other dusting powders.
• It is even non- volatile and oxidation resistant.

Typical Physical Properties:


Method of Applications:

• Before applying SHM MR 30/ SHM MR 35 the mould should be completely wetted which assures a continues, stable parting film and helps minimize cost per mouldings, Thus it eliminates sticking in extruders, moulds, calendars and other equipment throughout the rubber processing operation. The technique for applying SHM MR 30/ SM / HM Mr 35 varies because of difference in production equipments. SHM MR 30/ SHM MR 35 may be sprayed automatically of applied manually by swabbing, wiping, dipping or hand spraying.

Product Details:

Silicone Defoamer is silicone base proprietary product used extensively in a wide variety of industrial batch processing applications. These include petroleum refining, textile processing leather finishing, fermentation processes, oil and antifreeze operations etc.

Refer to the attached pdf for product catalogue.

Additional Information:

• Item Code: SHM-SD30

Product Details:

AMSIL 25/50/70 is a new textile Amino Silicone softer based on micro emulsion. This new class of Amino Silicone have particle size, 100 times less than normal amino silicone, Hence offers greater reactivity over commercially available amino silicone.

Product features:

• AMSIL 25/50/70 imparts premium softness combined with excellent durability at low usage. , prove full rich And silky hand, Increased tear strength, Improved wrinkle recovery, No extra unwanted body. Unimpaired Air circulation, Imparts extra brilliancy to fabrics, No separate catalyst catalyst addition is required.

Physical properties:


We recommend above proportion of dilution with dematerialized or distilled water only.
But still we suggest customers should take their own trials to suit their requirements.

Suggested uses:

• Imparts superior softness with novel fullness to a variety of woven or knit fabrics whether prepared from ring of open-end spun yarns.

AMSIL 25/50/70:

• Has fine particle size and a high molecular weigh
• Is the softest softener offered so far and it is exceptionally suited for hosiery applications. It is effective on 100% synthetics. 100% cotton and synthetic/Cotton blended fabrics.
• Bestows outstanding softening with premium fullness characteristics to 50/50 polyester cotton blends 100% polyester and 100% cotton knits.
• Also imparts superior softness and fullness of variety of other fabric types such as denim and 65/35 polyester/ cotton blends.
• Packing 30 kg, 50 kg, 200 kg.

Product Details:

We are one of the prominent manufacturers, traders and suppliers of simethicone activated oil. our offered simethicone activated oil is precisely processed using premium quality chemical compounds and innovative techniques in adherence with industry standard. Moreover, this simethicone activated oil is tested against various quality measures so as to ensure its quality. Our provided simethicone activated oil can be availed at industry leading prices.

features:

• accurate composition
• purity
• long shelf life