Aerosols Products

Product Details:

• It is anti Corrosion Spray when Sprayed it forms non staining then transparent water repellent film which protects the metel and give excess rust prevention and water displacement properties. It forms dry was like film. It has excellent must prevention and water displacement property. Film removal is not necessary before assembling the part.

Product Details:

Belt Dresser Spray is used for increasing transmission efficiency of V-Belts. Adheres strongly to belt surface and by way of polymeric action given extra pulling power. Stop squeaking & slipping extends Wear life and resistance to age hardening & cracking.

Additional Information:

• Item Code: BD200
• Production Capacity: 1000 pieces/day
• Delivery Time: 7 days
• Packaging Details: 25 pieces corrugated box

Product Details:

Teflon Powder is dispersed in suitable solvent to make colloidal dispersion. When applied, carrier fluid evaporates, leaving a thin film of PTFE on metal parts suitable for high temp. low clearance & stain free lubrication.

Additional Information:

• Item Code: TF70
• Production Capacity: 1000 pieces/day
• Delivery Time: 7 days
• Packaging Details: 25 pieces corrugated box

Product Details:

We are engaged in offering a comprehensive range of Spinneret Lubricant that is used to lubricate moving parts.We are a well-renowned organization in the industry to provide our patrons the best quality array of Spinneret Lubricant.

Additional Information:

• Item Code: YRS200
• Production Capacity: 1000 pieces/day
• Delivery Time: 7 days

Product Details:

Silkot CB-20 is specially formulated to get relief and time saving for cleaning carburettor and chokes.
Usually the gaskets or seals get damage while cleaning. It cleans chokes, carburettor Linkages, Heart risers and PVC valves.

DIRECTION FOR USE:

1. Carburettor Linkages: Turm Engine off. Remove Air Cleaner & Spray it on netire surface of carburettor including the linkages & Calk Shaft. Let it shok it for a minute then retry to flush off the dirt.
2. Automatic Chokes: Turn Engine off. Spray on both endsof choke valves.
3. Pvc Valves: Turn Engine off. Disconnect crank case of PVC valve spray it into open end value & spray while working valve back & forth. Start Engine & spray again to flush valve.
4. Carbthroat and Throttle Plate: While Engine running at normal speed spray in burtst around inside of carburattor thorat to remove deposit on throttle plate ae.

ADVANTAGES:

Silkot CB -20 is specially formulated to quickly and easily remove grease, oil, varnish, gun and dirt. It helps to reduce high exhaust emissions & problems caused by carburettor deposits.

CAUTION:

Contents under pressure keep away from direct Heat. Do not store above 50⁰C. Do not Puncture or incinerate can ever when empty.

Net content: 300gms (450ml.)

Product Details:

With the assistance of our skilled professionals, we have become proficient in offering superior quality Silicone Thread Lubricants for Treadmills. Our quality controllers test this product on various defined parameters in order to offer perfect range at clients’ end.

Features:

• Premium quality
• Fine finish
• Long life

Additional Information:

• Item Code: TR30
• Production Capacity: 1000 pieces/day
• Delivery Time: 7 days
• Packaging Details: 25kg corrugated box

Product Details:

Being a quality conscious entity, we are committed in providing the best quality product. Checked on various quality assurance procedures, these product are known for their sturdy construction and compact design.

Product Details:

Anti-stick agent for all type off general mouldings , various types of plastics, rubber , Bakelite core moulding & metal die casting. Water repellent foe natural & synthetic fibres, batteries etc

Product Details:

Belt Dressing Spray for increasing transmission efficiency of V-Belts. Adheres strongly to belt surface and by way of polymeric action given extra pulling power. Stop squeaking & slipping extends Wear life and resistance to age hardening & cracking.

Product Details:

• Silkot Open Chain Lubricant Is Also Valuable In An Aerosol Spray Container. The Solvent Propellant Has Been Removed, Making Open Chain Lubricant Environmentally Safer And TCLP-SAFE.

Additional Information:

• Item Code: 1280
• Production Capacity: 5000 pieces/day
• Delivery Time: 7 days

Product Details:

• It is Zink corrosion protection with 99% microcline zinc powder . It provide protection from all polished metal surface & forms adhesive fast drying permanent primer for bonded lubrication. The outstanding corrosion protection characteristics show up especially in electro-chemical (catholic) corrosion protection which prevents damages e.g. scratches surface from rust after treatment.

Product Details:

It is used for butane gas stove, camping gas stove, portable gas heater and for butane gas torch. It is also suitable for use with nationality approved portable gas stove, UN 2037

Additional Information:

• Item Code: F60
• Production Capacity: 1000 pieces/day
• Delivery Time: 7 days

Product Details:

DESCRIPTION: Moly Based Antiseize Lubricant Spray.

Benefits:

• Reduces friction and wear in high pressure sliding surfaces.
• Prevents seizing at high temperatures.
• Eases dismanting and assembling during installation and maintenance.
• Saves threaded parts from galling, distortion and breaking.
• Guards against rust and fresh and salt watercorrosion.
• Easy application in hardto reach areas.
• Prevents externalcontamination like fluff, dirt, dust and humidity.
• Eco friendly propellant promotes clean environment.

APPLICATION:   

• Product desinged keeping textile mills requirements in mind.
• For gears, racks, pinions, splines, shafts, nuts, bolts, slides, bushes, chain pins (especially in the enclosed gear drive systems in Autoconers)
• for press fit components.

 Characteristics            Test Method     Unit    Molyspin
 Appearance                 Visual             -        Oily Liquid
 Colour                         Visual            -        Greyish back
 Denisty @ 27⁰C(typ)      *CTM            gms/cc 0.86 
Film Type                      Visual            -         Wet
Solid Lubricant                  -                -          Mos2
Propellant                        -                 -         Non-CFC

*CTM=Corporate Test Method

Packing : 500ml Aerosol can

Carton Size : 10/25 cans per carton

Additional Information:

• Item Code: 5010
• Production Capacity: 1,000 pieces/day
• Delivery Time: 7 days
• Packaging Details: 25 pieces carton

Product Details:

Being a well-established organization, we are offering a wide range of Paintable Mold Release Spray. Our offered Paintable Mold Release Spray is widely appreciated for their eco-friendliness, and accurate composition in the market. Our provided paintable mold release spray is processed using excellent quality chemical compounds and latest technology by adept professionals. Moreover, these paintable mold release sprays are strictly tested by our quality examiners on various parameters for ensuring their quality.

Features:

• Odourless
• Long shelf life
• Weather resistance

Product Details:

• Anti-stick agent for all type off general mouldings , various types of plastics, rubber , Bakelite core moulding & metal die casting. Water repellent foe natural & synthetic fibres, batteries etc.

Product Details:

• Anti Spatter Spray is a superior welding aid and is idea for all kind of welding jobs. The spray forms a film on any metal spatter from adhering, Being non- migratory, non toxic, makes welding easier by eliminating spatter cleaning problem.

Product Details:

• It Is Quick Drying Spray Based On Acrylic Epoxy Resin. It Is Available In Various Shades

Anti Seize Lubricant spray is used for threaded connections for withstanding high loads. Anti Seize Lubricant for oven used in lacquering ceramic components, high temp., parting/release agent & lubrication additive for thermo-plastic composites.

Product Details:

NDT- Cleaner Developer-penetrant